Jul 312011
 

Feel free to skip reading this, is mostly for my notes anyway.

http://archlinuxarm.org/platforms/armv5/pogoplug-v2-pinkgray

I have a 1TB drive in a USB enclosure.
instead of using the entire drive as a single partition, I used +10G for the size of my / partition and finished installing as per the directions

Similar to how it was done in creating the / partition, I used +2G for the second partition and set the type to 82

I then created the final partition accepting all defaults

##################################
# Formatting / Mounting          #
##################################

mkswap -L hdswap /dev/sda2

mkfs.ext4 /dev/sda3

e2label /dev/sda3 data

mkdir /mnt/data

vi /etc/fstab
add:

Advertisement:
LABEL=hdswap  None          swap      sw                  0      0
LABEL=data    /mnt/data     ext4      defaults            0      1

swapon -a
swapon -s

mount /mnt/data

##################################
# ZNC                            #
##################################

The instructions for znc are pretty crap, but this works
http://archlinuxarm.org/support/guides/applications/znc

https://github.com/kylef/znc-arch

##################################
# Front LED                      #
##################################

echo default-on > /sys/class/leds/status:blue:health/trigger
echo default-on > /sys/class/leds/status:green:health/trigger

echo none > /sys/class/leds/status:blue:health/trigger
echo none > /sys/class/leds/status:green:health/trigger

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

(required)

(required)